Here is some advice for effectively maintaining your Jeanneau powerboat.
For the part of your boat that is above the waterline, the gelcoat is exposed to various phenomena, and the hull can yellow. Ready-to-use cleaning products that are specially formulated for boats exist. We also advise you to apply polish every year for a nice shine. You can find all our recommended products for exposed surfaces at your Jeanneau dealership.
For the part of the hull beneath the waterline, an annual haul-out is necessary to clean off the algae and seashells with a high-pressure sprayer.
After this cleaning, it is indispensable to apply a new coat of antifouling paint to protect the underside of the hull during the cruising season.
The deck is heavily used while cruising, enduring foot traffic by crew, rubbing from lines, exposure to salt, etc., and rust marks or other spots can appear. Whenever possible, and after each outing, rinse your deck with fresh water to prevent stains, and maintain your deck regularly with a specialised product.
For parts in teak or other types of wood, maintain them with regular brushing and the application of teak oil to nourish and maintain the wood in good condition over time.
For outboard engines, if your boat is in the water, we ask that you visually check the cooling system via the “check water” light (wash bottle) regularly.
If it is out of the water, you can rinse it with the “ears” or by submerging the lower unit in a basin.
Once the engine is off, you can remove the engine cover in order to check for leaks (salt, traces of grease). We also advise you to check the oil level via the gauge.
If your engine is so equipped, you can rinse it with fresh water using the manufacturer’s system.
For inboard engines, regularly open the engine hatch to check for signs of leaks in the bottom, as well as any traces of salt on the engine block or grease spots.
You can also check the oil level via the gauge
Your fabric on board, such as your cushions, Bimini and boat cover, are also affected by conditions in the marine environment.
We advise you to rinse them with fresh water after each use to protect them from UV rays and salt, and whenever possible, at the end of the season, dry them and store them in a dry place for the winter to avoid mildew spots.
You should also rinse the stainless steel tubes of your Biminis to avoid corrosion.
We advise you to maintain your tender and your fenders, as well, since they are made of PVC and a prolonged exposure without maintenance or protection from UV rays, salt and humidity can considerably reduce their lifespans. Like the deck and fabrics, don’t hesitate to rinse these elements with fresh water after each outing, if possible.
You can also use a specialised cleaning product to regain their shine and protect them from UV rays, in particular.
Your Jeanneau dealer is always available to assist and advise you, whether in the purchase of specific products for the maintenance of your boat, for a repair, in the purchase of a technical product to clean surfaces, advice in wintering your boat, expertise in maintaining your battery, or services for mechanical operations.